Epson 7700p - Manual (Page 21)

Setting Up the Projector 15
Connecting to Video Sources
You can connect a DVD player, VCR, camcorder, laser disc player,
digital camera, or any other compatible video source to your projector.
The projector supports HDTV, NTSC, PAL, and SECAM, and
automatically detects the video format. (However, if you’re using a
60-hertz PAL system, you’ll need to select
PAL60 in the Video menu,
as described on page 45.)
The projector can receive composite video, S-Video, and component
video. You can connect the projector to one or more of these video
sources at the same time. If all three are connected, the projector
automatically selects S-Video as the video source.
The type of cable you use depends on whether you have composite
video, S-Video, or component video.
■ For composite video, use the RCA video cables included with the
projector.
■ For component video, use the BNC-style cable that came with
your video device.
■ For S-Video, use the S-Video cable supplied with your video
device or obtain one from your electronics dealer.
See the following illustration if you’re unsure of which type of
connectors you have.
Follow the instructions below for your type of connection.
note
The projector does not
support TV antenna cable
F connectors.
4
2
3
1
S-Video
4-pin, mini-DIN
component video
BNC connector
composite video
RCA connector
7700.book Page 15 Wednesday, November 1, 2000 6:15 PM