Resetting the lamp timer, Caution – Epson 7700p User Manual

Page 68

Maintaining and Transporting the Projector

6. Fully insert the new lamp. (The plastic flap will flex out of the

way.)

7. Once the lamp is fully inserted, tighten its screws.

8. Replace the lamp cover and tighten its screw securely. (The

projector won’t come on if the lamp cover is loose.)

9. Reset the lamp timer as described in the following section.

Resetting the Lamp Timer

After you install a new lamp, you need to reset the timer so the
projector can keep track of how many hours it has been used. Follow
these steps:

1. Press the

Help

button and hold it down for at least 5 seconds.

You see the Help menu, and then the following message:

caution

Do not touch the glass
portion of the lamp assembly.
Touching the glass could
result in premature lamp
failure.

Reset Lamp ON Time

Do you reset the Lamp ON Time?

Yes

:Select

:Execute

7700.book Page 62 Wednesday, November 1, 2000 6:15 PM