Epson 7700p - Manual (Page 51)

Fine-tuning the Projector 45
■ Tint (video only)
Adjusts the balance of green to magenta in the image.
■ Sharpness
■ Gamma
Choose Dynamic for computer images with bright colors
(such as charts or graphs), or Natural to enhance video
images.
■ Resolution (computer images only)
Leave this setting at Auto to allow the projector to detect the
video signal automatically. If the projector is unable to sync
up with the computer, select
Manual and choose from 32
settings.
■ Video Signal
Leave this setting at Auto unless you are using a 60-hertz PAL
system (select PAL60 ).
4. When the image is set correctly, press Esc . Your settings are
automatically saved.
Saving and Recalling Computer Settings
When you are projecting from a computer source, you can save and
recall settings (resolution, tracking, sync signal, and position) for up to
five different sessions. This is useful if you use more than one
computer with the projector; you can save the settings for each one
and recall them when necessary. Follow these steps to save the current
session settings:
1. Press the Menu button to display the Main menu.
2. Press Enter to select the Video menu.
3. Use the down arrow (control panel) or Enter button (remote
control) to move down to the Preset option and press Enter . You
see the Preset Selection menu with the current resolution setting
displayed.
7700.book Page 45 Wednesday, November 1, 2000 6:15 PM