Epson 7700p - Manual (Page 50)

44 Fine-tuning the Projector
Repositioning the Image
Follow these steps to fine-tune the image position:
1. Press the Menu button. You see the main menu.
2. Press Enter to select the Video menu.
3. Press Enter to select the Position
option. You see the following on the
right side of the screen:
4. Use the arrow buttons (control panel)
or the Enter button (remote control) to
move the image left, right, up, or down.
5. When the image is positioned the way you want, press Esc .
Adjusting Image Appearance
Follow these steps to adjust the appearance of your image:
1. Press the Menu button. You see the main menu.
2. Press Enter to select the Video menu.
3. Use the arrow buttons (control panel) or the Enter button
(remote control) to set one of the following options:
■ Brightness
Lightens or darkens the overall image.
■ Contrast
Adjusts the difference between light and dark areas.
■ Tracking (computer images only)
Removes unwanted vertical lines from a computer image by
matching the projector’s internal clock to various computer
signals.
■ Sync (computer images only)
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
■ Color (composite video or S-Video only)
Adjusts the depth or intensity of the image.
note
If you have repositioned the
image or adjusted the sync
setting, you can use the
Auto button on the remote
control to restore the default
settings.
7700.book Page 44 Wednesday, November 1, 2000 6:15 PM