Epson 7700p - Manual (Page 30)

24 Using the Projector
Adjusting the Image
Once you see your image, you’ll need to make certain adjustments:
■ To focus or zoom your image, see below.
■ If only part of a computer image is displayed, you may need to
press the
Resize button. See page 25 for more information.
■ If the image is too high or too low, you can reposition it. See
page 25.
■ If the image isn’t square, see page 26.
■ If the projected image is flickering or “noisy,” see page 26.
Focusing and Zooming Your Image
Rotate the focus ring to sharpen the image.
Rotate the zoom ring to reduce or enlarge the image.
If the image still isn’t large enough, you may need to move the
projector farther away from the screen. You can also use the
E-Zoom
button on the remote control to zoom in on a portion of the image.
See page 33 for instructions.
focus ring
zoom ring
7700.book Page 24 Wednesday, November 1, 2000 6:15 PM