Canon PIXMA G620 Printer - Manual (Page 36)

• When displaying the Security protocol , a screen appears asking whether to display the •
password at the same time. To display the password, select Yes . To not display the password,
select No .
• The password is required when connecting a device to the printer. Depending on the device you •
are using, no password is required.
• When you connect a Wi-Fi Direct compatible device to the printer, select the printer name from •
your device.
• To change the identifier (SSID) and the password, see below. •
Changing Wireless Direct Setting
Connecting a smartphone/tablet/computer to the printer
1. Enable Wi-Fi function on smartphone/tablet/computer. 1.
Enable Wi-Fi in the Settings menu on your smartphone/tablet/computer.
For instructions on enabling the Wi-Fi function, refer to the instruction manual for your smartphone/
tablet/computer.
2. Select "DIRECT-XXXX-G600series" ("X" represents alphanumeric characters) from list on 2.
your smartphone/tablet/computer.
Note
• If "DIRECT-XXXX-G600series" does not appear on the list, Wireless Direct is not enabled. •
See Changing Printer Setting to Use Wireless Direct to enable Wireless Direct.
3. Enter Password on smartphone/tablet/computer. 3.
The smartphone/tablet/computer is connected to the printer.
Note
• Check the password for the Wireless Direct. •
Check by one of the following methods.
Display on the LCD of the printer.
LAN settings
Print the network settings.
Printing Network Settings
• Depending on the device you are using, entering the password is required to connect a device •
to the printer via Wi-Fi. Enter the password specified for the printer.
• If the printer is set to display a confirmation screen in Confirm request of Changing •
Wireless Direct Setting , when the wireless direct compatible device connects to the printer,
a confirmation screen asking for permission to connect is displayed on the printer LCD.
36