Canon PIXMA G620 Printer - Manual (Page 169)

Firmware update
Select this menu from Device settings in Setup menu .
You can update the firmware of the printer, check the firmware version, or perform settings of a notification
screen, a DNS server and a proxy server.
Important
• When you use this function, make sure the printer is connected to the internet. •
Note
• Only Current version is available when Disable is selected for Wi-Fi enab./disable of Wi-Fi in LAN •
settings .
• Install update •
Performs the firmware update of the printer. Follow the on-screen instructions to perform update.
Note
• If the firmware update is not complete, check the following and take an appropriate action. •
Check the network settings such as a wireless router.
If Cannot connect to the server; try again is displayed on the LCD, press the OK button and
try again after a while.
• Current version •
You can check the current firmware version.
• Update notification •
You can set the printer to display the firmware update information on the LCD when the firmware update
is available.
When Idle/Power off is selected, the printer informs you of the update during idle and the update
information also appears when you press the ON button.
• Auto update setting •
Select ON to automatically update the firmware to the latest version.
• DNS server setup •
Performs settings for a DNS server. Select Auto setup or Manual setup . If you select Manual setup ,
follow the display on the LCD to perform settings.
• Proxy server setup •
Performs settings for a proxy server. Select Use or Do not use . If you select Use , follow the display on
the LCD to perform settings.
169