Canon PIXMA G620 Printer - Manual (Page 279)

2. Check that paper is now flat. 2.
We recommend printing curl-corrected paper one sheet at a time.
Note
• Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward. •
Follow the instructions below to curl the paper outward up to 0.1 in. / 3 mm (C) in height before printing.
This may improve the print result.
(B) Print side
We recommend feeding paper that has been curled outward one sheet at a time.
Check4 Set printer to prevent paper abrasion.
Adjusting the setting to prevent paper abrasion will widen the clearance between the print head and the paper.
If you notice abrasion even with the media type set correctly to match the paper, set the printer to prevent paper
abrasion using the operation panel or the computer.
This may reduce the print speed.
* Once you have finished printing, undo this setting. Otherwise, it will apply to subsequent print jobs.
• From operation panel •
Press the Setup button and select Device settings > Print settings in this order, and then set Prevent
abrasion to ON .
Changing Settings from Operation Panel
• From computer (Windows): •
1. Check that printer is turned on. 1.
2. Open Canon IJ Printer Assistant Tool. 2.
Opening the Maintenance Tool (Canon IJ Printer Assistant Tool)
3. Select Custom Settings . 3.
4. Select Prevents paper abrasion check box and select OK . 4.
279