Canon MAXIFY GX5020 Wireless MegaTank Inkjet Color Printer - Manual (Page 56)

Note
• If you choose PEAP or EAP-TTLS , you do not need to do this. •
11. Set up Weak encryption restriction . 11.
Select Restrict .
12. Set up Weak certificate restriction . 12.
Select Restrict .
13. Select Enable/disable IEEE802.1X/EAP to enable IEEE802.1X/EAP 13.
Select OK and save the settings to enable IEEE802.1X/EAP.
Note
• You can enable or disable IEEE802.1X/EAP on the operation panel. •
Note that the advanced IEEE802.1X/EAP settings are not available on the operation panel.
14. Connect to IEEE802.1X/EAP switch (Authenticator) or IEEE802.1X/EAP access point. 14.
When IEEE802.1X/EAP is enabled, it is possible to search for SSIDs of IEEE802.1X/EAP access
points in
Manual setup on the operation panel.
Select the SSID of the IEEE802.1X/EAP access point to connect.
For a wired LAN, connect the LAN cable to the IEEE802.1X/EAP switch.
If You Cannot Connect
If you are unable to connect to the IEEE802.1X/EAP switch (Authenticator) or access point, please redo
the settings from step 3 above.
Important
• Wireless Direct is disabled when you connect to an IEEE802.1X/EAP access point. When using •
the Remote UI, enable Wireless Direct from the operation panel settings and connect again using
Wireless Direct.
Note
• From the Setup menu screen, select Device settings > LAN settings > Wi-Fi > Manual setup > •
IEEE802.1X/EAP > Latest auth. result to help troubleshoot.
1. Check that the wireless router is turned on is displayed when the switch/access point may not 1.
be turned on.
2. If the error cannot be identified, such as multiple problems occurring, An error has occurred is 2.
displayed.
3. If a connection processing problem or encryption-authentication mismatch is detected, Failed to 3.
connect to the wireless router is displayed.
56