Admin pwd. settings – Canon MAXIFY GX5020 Wireless MegaTank Inkjet Color Printer User Manual
Page 175
Admin pwd. settings
The administrator password can be set or canceled.
Important
• The administrator password of the printer is set by default. It is set in the serial number of the printer
•
which consists of 9 characters (the first 4 characters are alphabet and the latter 5 characters are
number) and is indicated on the seal on the device.
• The administrator password may be required to change the settings.
•
1.
Check that printer is turned on.
1.
2.
Press the
Setup
button.
2.
The
Setup menu
screen is displayed.
3.
Select
Device settings
and then press the
OK
button.
3.
4.
Select
Admin pwd. settings
and then press the
OK
button.
4.
5.
Enter the administrator password.
5.
When the administrator password is not set, proceed to step 7.
6.
Select
Change admin pwd.
and then press the
OK
button.
6.
When you do not set the administrator password, select
Remove admin pwd.
. Select
Yes
in the
displayed screen.
7.
Select the effective range of the administrator password.
7.
Remote UI and tools
To change the setting using the remote UI or a certain software, the administrator password needs
to be entered.
LCD, RMT UI, tools
To change the setting using the operation panel of this printer, remote UI or a certain software, the
administrator password needs to be entered.
8.
Enter the administrator password.
8.
Important
• When changing the password, the character is limited as follows.
•
Set the password using 4 to 32 characters.
Only alphanumeric characters are available.
From a security point of view, it is recommended to set the password of 8 characters or more
in combination of alphanumeric characters.
175