Pentax K-3 Mark III DSLR Camera (Black) - Manual (Page 85)

3
Shoo
ting
83
The texture and surface details of an
image can be adjusted in the range of
-4 to +4.
Make settings in [Clarity] of the
A 6
menu.
The skin tone of portraits can be
enhanced.
Make settings in [Skin Tone] of the
A 6 menu.
By using the built-in Shake Reduction unit of the camera,
blurring of images can be reduced.
Press
5 or use [Shake Reduction]
of the A 7 menu to turn on and off
this function.
In B mode, select [On] or [Off].
t Memo
• [Shake Reduction] is fixed to [Off] in the following situations.
• In M mode
• When [Drive Mode] is set to [Mirror Lock-up Shooting],
[Self-timer], or [Remote Control] in the A 4 menu
• While [Pixel Shift Resolution] of the A 4 menu is used
• To not turn [Shake Reduction] off while [Self-timer] or
[Remote Control] of [Drive Mode] in the A 4 menu is used,
set [Auto Shake Reduction Off] to [Disable Auto SR Off] in the
A 7 or B 7 menu.
• You can set the camera operation when 5 is pressed in
[Shake Reduction] of [Fx Button] in the E 2 menu. (p.103)
u Caution
• The operating noise of the Shake Reduction unit may be
recorded during movie recording.
Adjusting the Texture A 6
Enhancing the Skin Tone A 6
Type 1
Determines the skin tone of the subject by the Face
Detection function, and creates a natural-looking skin
tone. (The skin tone is enhanced only when a face is
detected.)
Type 2
Softens the entire image, and makes skin
irregularities less noticeable.
Clarity
Cancel Cancel OK OK
Skin Tone
Adjusts the hue and lightness of
the skin based on the detected face.
Type 1
Type 2
Off
Cancel Cancel OK OK
Reducing Blurring of Images A 7 / B 7
Auto
Automatically switches between the normal Shake
Reduction function and the Shake Reduction
function specialized for panning.
Panning
Turns on the Shake Reduction function specialized
for panning a slowly moving subject.
Off Turns off the Shake Reduction function.
Shake Reduction
Applies Shake Reduction to match
camera conditions.
Auto
Panning
Off
Cancel Cancel OK OK