Pentax K-3 Mark III DSLR Camera (Black) - Manual (Page 71)

3
Shoo
ting
69
You can take three images continuously by changing the shutter
speed step by step without changing the exposure.
This drive mode can be selected only in
I or K mode.
1
Select [Motion Bracketing] on the [Drive]
screen.
2
Set the bracket value.
Available operations
3
Press E .
The camera returns to the standby mode.
4
Shoot.
Three images are taken with one release of the shutter.
The camera returns to the standby mode.
t Memo
• The bracket value can be set in increments of [1/3 EV Steps]
or [1/2 EV Steps] according to the setting of [EV Steps] in the
E 5 menu.
1
Select [Mirror Lock-up
Shooting] on the [Drive]
screen.
2
Press E .
The camera returns to the standby mode.
3
Press 0 halfway, and then fully.
The mirror pops up and the AE Lock function is activated.
4
Press 0 fully again.
The mirror returns to its original position after the image is
taken.
t Memo
• A beep sound is made during mirror lock-up shooting. You
can also make settings so that a beep sound is not made.
(p.110)
• During mirror lock-up shooting, [Shake Reduction] is fixed to
[Off] in the A 7 menu.
• The outside-field-of-view information is not displayed in the
viewfinder during mirror lock-up shooting.
• The mirror automatically returns to its original position if 1
minute elapses after the mirror pops up.
Motion Bracketing
R Changes the bracket value.
M Resets the bracket value to the default
setting.
Larger bracket
value
Takes an image in which the subject
appears to be stationary based on the
current shutter speed.
Smaller bracket
value
Takes an image in which the subject
appears to be moving based on the
current shutter speed.
-1.0STEP -1.0STEP
Drive Drive
Motion Bracketing
Motion Bracketing
OK OK Cancel Cancel
Mirror Lock-up Shooting
Drive Drive
Mirror Lock-up Shooting
Mirror Lock-up Shooting
OK OK Cancel Cancel