Pentax K-3 Mark III DSLR Camera (Black) - Manual (Page 84)

3
Shoo
ting
82
Pixel Shift Resolution is the function that enables outputting a high-
definition image of a stationary object by merging four images.
Make settings in [Pixel Shift
Resolution] of the
A 4 menu.
When shooting is performed, captured four images are
displayed in turn, and then they are merged into a single image.
t Memo
• The use of Pixel Shift Resolution function in combination with
[Mirror Lock-up Shooting], [Self-timer], or [Remote Control] of
[Drive Mode] in the
A 4 menu is recommended.
• While the Pixel Shift Resolution function is used, [Shake
Reduction] is fixed to [Off] in the A 7 menu.
u Caution
• The Pixel Shift Resolution function cannot be used in the
following situations.
• In
M or N mode
• In B mode
• This function cannot be used in combination with some other
functions. (p.115)
• While the Pixel Shift Resolution function is used, [AA Filter
Simulator] is fixed to [Off] in the A 4 menu.
• When shooting with [Pixel Shift Resolution], use a tripod and
mount the camera on it securely.
By shaking the Shake Reduction unit, a moiré reduction effect
simulating that of a low-pass filter can be achieved.
1
Select [AA Filter Simulator] in the A 4 menu and
press D .
2
Select a capture type and
press
E .
u Caution
• This function cannot be used in combination with some other
functions. (p.115)
• [Bracketing (Off, High)] and [Bracketing (Off, Lo, Hi)] cannot
be selected in the following situations.
• In
M mode
• When [Drive Mode] is set to other than [Single Frame
Shooting] in the A 4 menu
• While [HDR Capture] or [Pixel Shift Resolution] of the A 4
menu is used
• When the shutter speed is faster than 1/1000 seconds, the full
effect of this function cannot be achieved.
Adjusting the Image Quality Level and
Texture
Shooting High-Definition Images A 4
Tripod (Motion
Corr. On) Reduces mosaic-pattern noise when a
moving object is detected.
Tripod (Motion
Corr. Off)
Does not detect moving objects.
Off Does not use Pixel Shift Resolution.
99999 99999 99999 99999 Pixel Shift Resolution
Securely mount the camera on a tripod
and then shoot a still subject. Correction
is applied when the subject moves.
Tripod (Motion Corr. On)
Tripod (Motion Corr. Off)
Off
Cancel Cancel OK OK
Reducing Moiré A 4
Low
Takes images while balancing the
resolution and moiré reduction.
High Prioritizes the moiré reduction.
Bracketing
(Off, High) Takes consecutive two images in order of
[Off] and [High].
Bracketing
(Off, Lo, Hi) Takes consecutive three images in order
of [Off], [Low], and [High].
High
Low
Bracketing (Off, High)
Bracketing (Off, Lo, Hi)
Off
AA Filter Simulator
Cancel Cancel OK OK