Pentax K-3 Mark III DSLR Camera (Black) - Manual (Page 49)

2
G
etting
Started
47
You can review the captured image on the monitor.
1
Press 3 .
The camera enters the playback
mode and the most recently
captured image is displayed
(single image display).
2
Review the captured image.
Available operations
t Memo
• When R is turned to the right to magnify the image, the
magnification is displayed at the bottom right of the screen.
“100%” appears when the image is displayed at the actual
pixel size (1× image display). You can set the display
magnification and trigger operation when magnifying images
in [Quick Zoom] of [Zoom Review] in the
E 4 menu. (p.109)
• When O is displayed on the monitor, the JPEG image that
was just taken can also be saved in RAW format (Save RAW
Data).
• You can change the information to display in the single image
display in [Playback Info Display] of [Monitor Display] in the
E 4 menu. (p.108)
• While the power is on, the last played image is stored. If you
want to store the last played image even when the camera is
turned off, set [Image for Playback] to
Z (On) in [Memory] of
the E 5 menu. (p.111)
Reviewing Images
CD / Q / Flick Displays the previous or next
image.
L Deletes the image.
R to the right /
Pinch out /
Double-tap
Magnifies the image (up to 16×).
Use
6 to change the area to
display.
Push the lever in to return the
display area to the center of the
image.
E Magnifies the image with the
magnification set in [Quick Zoom]
of [Zoom Review] in the
E 4
menu. (p.109)
In magnified view: Returns to the
entire image display.
10:00 10:00
1/1 1/1 EV 0.0 EV 0.0 1/100 1/100 F5.6 F5.6 200 200
100-0001 100-0001 01/01/2021 01/01/2021
Manage Image Manage Image
R to the left /
Pinch in
Switches to the thumbnail display
(p.85).
M Switches between the SD1 card
and the SD2 card.
O Saves the RAW data (only when
a JPEG image was taken and the
data remains in the buffer).
G Changes the type of information
displayed (p.14).
H /
Tap and hold
Displays the playback function
selection screen (p.85).