Pentax K-3 Mark III DSLR Camera (Black) - Manual (Page 44)

2
G
etting
Started
42
4
Rotate the memory card
cover as shown by
3 , and
slide it in the direction of
4 .
u Caution
• When inserting a memory card into the memory card slot,
insert it straight. Inserting the memory card at an angle or
applying excessive force may damage the card or memory
card slot.
• Do not remove the memory card while the card access lamp
is lit.
• If the memory card cover is opened while the power is on, the
camera turns off. Do not open the cover while the camera is
in use.
• Use this camera to format (initialize) a memory card that is
unused or has been previously used on other devices. (p.43)
• Use a high-speed memory card when recording movies. If the
writing speed cannot keep up with the recording speed,
writing may stop during recording.
t Memo
• For details on how the data is recorded when two memory
cards are inserted, refer to “Memory Card Recording
Settings” (p.48).
• Memory cards compatible with the UHS-I/UHS-II standard
can be used. However, if an UHS-II memory card is inserted
in the SD2 slot, it operates at a speed equivalent to UHS-I.
Turn the camera on and make the initial settings.
1
Turn the main switch to
[ON].
The first time the camera is
turned on after purchase, the
[Language/
W ] screen
appears.
t Memo
• The power automatically turns off when you do not perform
any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off] of the
D 5 menu. The camera recovers from Auto Power Off when
0 or 3 is pressed.
4
3
Initial Settings
Turning the Camera On