Pentax K-3 Mark III DSLR Camera (Black) - Manual (Page 103)

6
Se
tting
s
101
You can change the settings assigned to the mode dial.
1
Select [Recall User Mode Setting] in the E 1
menu and press D .
The [Recall User Mode Setting] screen appears.
2
Select a user mode to
register the saved settings
to from USER1 (
O ) to
USER5 ( 5 ) of the mode
dial, and press D .
3
Select the saved settings from [BOX1] to
[BOX10], and press
E .
The selected settings are assigned to the mode dial.
The screen of Step 2 reappears.
t Memo
• If [Recall User Mode Setting] is registered as a function
displayed in the control panel, you can use R to change the
box when the mode dial is set to O to 5 . (p.106)
1
Set the mode dial to O to 5 .
2
Change the settings as necessary.
The exposure mode can be
temporarily changed in
[Exposure in User Mode] of the
E 1 menu.
t Memo
• The settings changed in Step 2 are not saved as the user
mode settings. When the camera is turned off or the mode
dial is turned, the user mode settings are reset to the
originally saved ones. The timing to reset the user mode
settings can be set in [User Settings Restoration] in the
E 1
menu.
• If the settings saved in the box assigned to the mode dial are
changed, the settings applied to the mode dial are also
changed.
Changing the Settings
USER1:
USER2:
USER3:
Recall User Mode Setting
Assign settings saved
in User Mode Box
to Mode Dial.
Using the User Mode
Setting
When the camera is
turned off
When the mode dial is
turned
Type 1 Reset Not reset
Type 2 Not reset Reset
Type 3 Reset Reset
Program AE
Shutter Priority AE
Sensitivity Priority AE
Shutter & Aperture Prior.
Manual Exposure
Aperture Priority AE
Exposure in User Mode
Cancel Cancel OK OK