Pentax K-3 Mark III DSLR Camera (Black) - Manual (Page 66)

3
Shoo
ting
64
You can set the autofocus operation in B mode. Select
whether to lock focus or continue autofocus.
When [Continuous AF] is selected, autofocus is performed
automatically without pressing
0 halfway. The continuous
autofocus function is available only when a compatible lens is
attached.
When [Highlight Edge] or [Extract Edge] is selected, the outline
and contrast of the subject in focus are emphasized, and this
makes it easier to check the focus. This function works in both
v and w focus methods.
u Caution
• While autofocusing and recording a movie, focus peaking is
not displayed.
• While focus peaking is displayed, the histogram and highlight
alert are not displayed.
You can select the camera operation priority for when the
0 is pressed fully from [Focus-priority] and [Release-
priority].
You can make settings so that the camera detects the faces of
up to ten people and performs autofocus for the detected faces.
You can precisely fine-tune your lenses with the camera’s
autofocus system.
1
Select [AF Fine Adjustment] in the E 7 menu and
press D .
The [AF Fine Adjustment] screen appears.
2
Press D .
The adjustment method selection screen appears.
3
Select the adjustment method and press E .
4
Press B and adjust the
value.
Available operations
5
Press F twice.
The camera returns to the standby mode.
Movie Mode AF
Focus Peaking
Contrast AF Options
Face Detection
On
Detects faces when [AF Active Area] is set
to other than [Tracking].
Only in Auto Area
Detects faces only when [AF Active Area]
is set to [Auto Area].
Off
Follows the [Face Detection] setting
without detecting faces.
Fine-tuning the Autofocus E 7
Common
Applies the same adjustment value to all
lenses.
Individual
Saves an adjustment value for the lens being
used. (Up to 20 values can be saved.)
Off Does not fine-tune the autofocus.
D Adjusts the focus to a closer position (toward
the front).
C Adjusts the focus to a farther position
(toward the rear).
M When [Individual] is selected: Resets the
adjustment value to the default setting.
+5
AF Fine Adjustment
AF Fine Adjustment
Reset Reset