Pentax K-3 Mark III DSLR Camera (Black) - Manual (Page 25)

1
In
troduc
tion
23
AF Assist Light
Illuminates the assist light when autofocusing in dark
locations.
On p.60
A 2 Exposure Setting
AE Metering
Selects the part of the sensor to use for measuring
brightness and determining the exposure.
Multi-segment p.59
Face Priority AE
Adjusts the exposure value by giving priority to the detected
faces when [AE Metering] is set to [Multi-segment].
On p.59
Link AE and AF Point
Adjusts the exposure value according to the brightness of
the AF point.
Off p.59
ISO Sensitivity
Setting
ISO Auto Upper Limit Sets the ISO sensitivity upper limit for ISO Auto. 6400
p.57
ISO Auto Lower Limit Sets the ISO sensitivity lower limit for ISO Auto. 100
Min. Shutter Speed
Op. Sets whether to set the minimum shutter speed
automatically or manually.
Auto
ISO Auto with Min.
Speed
Sets how to increase the sensitivity. Standard
Minimum Shutter
Speed Sets the shutter speed at which the ISO sensitivity is increased
when [Min. Shutter Speed Op.] is set to [Shutter Speed Control].
1/125
Flash Mode Sets the flash mode.
Flash On or
Auto Flash
Discharge
p.77
Program Line Selects the Program Line setting. Standard p.52
Auto EV Compensation
Automatically compensates the exposure when the correct
exposure cannot be achieved with the current settings.
Off p.51
A 3 White Balance Settings
White Balance Sets the white balance according to the light source.
Auto White
Balance
p.74
Auto Adjust. for Source
Automatically fine-tunes the white balance when the light
source is specified for the white balance setting.
Off
p.75
AWB in Tungsten Light
Sets the correction level for tungsten light when the white
balance is set to [Auto White Balance].
High
A 4 Shooting Settings
Drive Mode
Drive Selects the drive mode.
Single Frame
Shooting
p.66
Timer/Remote
Control Sets whether to use the self-timer and remote control
functions.
Off p.73
Item Function Default Setting Page