Eagle Electronics II User Manual

Page 71

there is an "OK" in this field, then the range error to that
satellite is 8 meters or less 68 percent of the time.

For more information, read your beacon receiver's
manual.

SELECT UNITS OF MEASURE
The AccuNav Sport™ can display distance in miles,
kilometers, or nautical miles, velocity in miles per hour,
kilometers per hour, or knots, bearing in degrees mag-
netic or true, altitude in feet or meters, and time in 12
hour or 24 hour format.

To change any these, first press the MENU key. Next,
press the F5 (CHANGE GPS SETTINGS) key. Finally,
press the F3 (SELECT UNITS OF MEASURE) key. The
screen shown at right appears. The black box on each
line shows the unit of measure currently in use. On this

screen, the units of measure are in statute miles for
distance, miles per hour for velocity, degrees magnetic
for bearing, altitude in feet, and time is in the 12 hour
format (A.M./P.M..)

Press the key corresponding to the unit that you wish to
change. For example,
press the F1 key twice
to switch from miles to
kilometers. This
moves the black box
two times from the “MI”
to the “KM”.

When you have the
units of measure set
as desired, press the
CLR key.