Eagle Electronics II - Manual (Page 65)

61
current software version number also appears near the
bottom of the screen. Contact the factory customer
service department if the module fails the self test. DO
NOT ATTEMPT TO USE THIS PRODUCT IF IT FAILS
THE SELF TEST.
To use the self test fea-
ture, press the MENU
key twice , then press
the F4 (GPS MODULE
SELF TEST) key. The
screen shown at right
appears.
To exit from this
screen, press the
CLEAR key.
GPS SIMULATOR
This feature places position and navigation data on all
screens, including the plotter. The unit “navigates” a
closed course. It shows bearing and distance to go,
course over ground, and other information. A recurring
message appears, alerting you that the simulator mode
is enabled. DON’T NAVIGATE WHEN THE SIMULA-
TOR IS ON!
To turn the simulator on, press the MENU key twice,
then press the F5 (GPS SIMULATOR OFF ON) key. The
simulator mode starts immediately. To turn the simula-
tor off, either press and hold the OFF key or repeat the
above steps.