Eagle Electronics II - Manual (Page 67)

63
RED
WHITE (+)
SHIELD (-)
GREEN (+)
RED
SHIELD (-)
ACCUNAV SPORT
SENDING DATA
TO ANOTHER DEVICE
ACCUNAV SPORT
RECEIVING DATA
FROM A DGPS
BEACON RECEIVER
ACCUNAV
SPORT
ACCUNAV
SPORT
FUSE
FUSE
optional NDC-1 adapter cable. This cable has seven
wires- red, black, brown, blue, green, white and a
braided shield. The red (positive) and shield (ground)
wires are power input (+6 to +35 VDC) to the AccuNav
Sport™. If the red wire is not used, tape its end so that
it cannot short. The white and green wires are for a
NMEA interface and/or a DGPS beacon receiver. The
AccuNav Sport sends data to another electronic naviga-
tion devices through the white wire and receives data
from a beacon receiver through the green wire. The
blue, black, and brown wires are not used.
To connect a device to the AccuNav Sport's white or
green wires, attach a twisted pair cable from the
device's NMEA input to the white wire on the NDC-1
cable. Solder the ground conductor of the twisted pair
to the shield wire on the AccuNav Sport's NDC-1
cable. See the other instrument's manual for more
wiring instructions.