Eagle Electronics II - Manual (Page 12)

8
Now push the battery pack out the bottom of the battery
cover as shown at right. Install the batteries with the
negative end (-) toward the springs. The positive end (+)
should be firmly against the metal plate. When all six
batteries are installed in the battery pack, slide it into the
battery cover.
If the battery holder sticks when sliding it into the battery
cover, apply a thin film of petroleum jelly to the "O" rings
on the battery holder.
Slide the battery pack onto the unit and the AccuNav
Sport is now ready for use.
Notice!
There is a tab on the top of the battery holder that
aligns with a slot on the top of the battery cover. Make
certain the tab is aligned properly! Otherwise the
battery holder won't slide all the way into the cover
and the battery cover won't slide onto the unit.
BATTERY
INSTALLATION