Eagle Electronics II - Manual (Page 61)

57
CLR key. This returns you to the GPS display.
CANCEL NAVIGATION
To stop the AccuNav Sport™ from navigating to a
waypoint or navigating to a waypoint in a route, press the
MENU key twice. Now press the F3 (CANCEL NAVIGA-
TION) key. This stops all navigation.
NOTE:
Canceling navigation does not erase the route or any
waypoints from memory. It merely stops the AccuNav
Sport™ from navigating to waypoints.
ALARMS
The AccuNav Sport™ has two alarms. One is an arrival
alarm that sounds when you come within a preset
distance to a waypoint. The other is a cross track error
alarm that sounds when you move off course more than
the alarm’s setting. Both of these alarms are set identi-
cally.
To adjust an alarm, first press the MENU key, then press
the F4 (ALARMS) key. The screen shown below ap-
pears. To turn any alarm on, press the key correspond-
ing to the desired
alarm's label until the
black box moves to
"ON", as we did on the
arrival alarm on the
screen shown on the
next page. To change
an alarm's setting,
press the key corre-
sponding to the de-
sired alarm until the
black box moves over