Eagle Electronics II - Manual (Page 62)

58
the numbers on the right side. In the example shown on
the right side of this page, the arrival alarm is selected.
Now press the ENT key. The screen shown on the next
page appears. The current alarm value shows in a
window on the screen which is labeled "OLD VALUE".
Use the numbered
keys to change the
alarm's setting, then
press the ENT key to
accept it. For ex-
ample, to set the ar-
rival alarm to 2 miles,
press the 2 key, then
press the 0 key twice.
To set the arrival
alarm to .2 of a mile
as shown on the next page, press the 2 key, then press
the 0 key. When the desired value has been entered,
press the ENT key to accept it. The unit returns to the
ALARMS screen as shown on the right side of the next
page. Notice that the alarm has automatically been
turned on. If an alarm
is off, and you adjust
it, the unit automati-
cally turns it on.
NOTE: If you need to
set an alarm to less
than one (1), enter a
zero first. For ex-
ample, to set the ar-
rival alarm to .5 miles,
press the following
number keys: 0 5 0.