Epson 2250 - Manual (Page 69)

Single sheets do not feed properly from the manual insertion slot.
Paper feeding is crooked or the paper jams.
Turn off the printer and pull out the paper. Insert a new
sheet straight into the paper slot. Make sure you’re using the
right type of paper. See the paper specifications in the
Appendix.
The paper may be too far to the right.
Move the paper a little to the left.
The paper does not eject completely.
The paper may be too long. Use paper that is within the
specified range. See the paper specifications in the Appendix.
Continuous paper does not feed properly.
•
When you send data or press the LF/FF button, the push tractor does
not feed the paper.
Check that the paper-release lever is in the raised,
continuous-paper position.
The paper has come off the push tractor. Reattach the paper
to the push tractor.
l
Paper feeding is crooked or the paper jams.
The position of your paper supply may be preventing it from
feeding straight. Make sure the paper supply is not
obstructed by a cable or some other object.
Make sure that your paper supply is positioned within 1
meter (3 feet) of the printer.
Check that the holes on the sides of the paper are aligned
with each other. Also, make sure the sprocket units are
locked and their covers are closed.
Check that the paper size and thickness are within the
specified range. See the paper specifications in the Appendix.
Using the Printer 3-25