Epson 2250 - Manual (Page 65)

Troubleshooting
The printer sounds like it is printing, but nothing is printed.
The ribbon cartridge may not be installed properly. See the
section on ribbon installation in Chapter 1.
The ribbon may be worn out. Replace the ribbon cartridge as
described earlier in this chapter.
The printer makes a strange noise, the beeper sounds several times, and
the printer stops abruptly.
Turn off the printer and check for a paper jam, a ribbon jam,
or other problems. If the printer still does not print correctly,
contact your dealer.
The beeper sounds several times and the READY light goes off.
An error has occurred. Turn off the printer and turn it on
again. If the READY light stays off, contact your dealer or a
qualified service person. (If an error occurs when you try to
switch between single sheets and continuous paper, see page
3 - 2 6 . )
The print is faint or uneven.
Printed characters have parts missing at the bottom.
The ribbon cartridge may not be installed properly. See the
section on ribbon installation in Chapter 1.
The printout is faint.
The ribbon may be worn out. Replace the ribbon cartridge as
described earlier in this chapter.
Using the Printer 3-21