Epson 2250 - Manual (Page 17)

Choosing a Place for the Printer
If you plan to use a printer stand, follow these guidelines:
Use a stand that supports at least 10 kg (22 lbs).
Never use a stand that tilts the printer. It should always be kept
level.
Make sure to provide enough clearance below the stand so your
continuous paper feeds smoothly.
Place cables so they do not interfere with paper feeding; secure
them to a leg of the stand if possible.
Align the continuous paper stack so the paper feeds straight into
the tractor’s sprocket units.
Installing the Ribbon Cartridge
Before you install the ribbon cartridge, make sure the power
cord is not plugged into an electrical outlet.
1. Use the tabs on both sides of the printer cover to lift it off the
printer. Then slide the print head to the middle of the printer.
Setting Up the Printer 1-5