Epson 2250 - Manual (Page 28)

Printing on Single Sheets
You can load standard-sized single sheets with the paper cassette
and you can load single sheets of paper from 148 mm (5.8 inches) to
257 mm (10.1 inches) wide with the manual insertion slot.
Tips for using the paper cassette
Review “Loading paper into the paper cassette” on page 1-8. Also,
the tips below will help you get the best performance when using
the cassette.
Load paper in the cassette before you turn on the printer and
send data. When the printer receives data from the computer, it
loads a single sheet automatically and begins to print.
If the printer runs out of paper during a print job, reload the
paper cassette and press the LF/FF button to load the paper.
Press the LF/FF button to eject a sheet of loaded paper.
You can adjust the top-of-form position with the gear under the
printer cover. It is marked by + and - signs. Open the printer
cover and turn the gear to adjust the position. The notches on the
ribbon mask indicate the base line of printed characters. The gear
adjustment affects only the loaded page. If you want to change
the top-of-form position permanently, you can adjust it in the
default-setting mode described in Chapter 3. However, most
software programs take care of the top and bottom margins. You
usually don’t need to set the top-of-form position on the printer.
ribbon mask
base line of characters
2-2 Paper Handling