Epson 2250 - Manual (Page 43)

Printing on Special Paper
Multi-part forms
You can use carbonless continuous multi-part forms of up to three
parts (one original plus two copies).
l
Load multi-part forms with the push tractor only. You load
multi-part continuous paper the same way as ordinary
continuous paper. For details, see “Loading continuous paper”
on page 2-7.
l
Use only multi-part forms joined with spot-gluing that is free of
wrinkles and waves. Never print on multi-part forms joined
with metal staples, tape, or continuous gluing.
l
If you need to adjust the top-of-form position, use your software
or change the default top-of-form position as described in
Chapter 3. You may have to experiment to get the setting you
want.
Labels
This printer can print on labels, but you must use the push tractor.
0
CAUTION: When you use labels, always be sure that
l they are not fed backward because backward feeding can
make them peel off their backing and jam the printer.
To make sure that the labels do not peel off and jam the printer,
change the back-feed setting in the default-setting mode to Disable.
(For instructions, see “Changing the default settings” in Chapter 3.)
When the back-feed setting is Disable, the printer never feeds paper
backward.
The back-feed setting of Disable produces the following results:
l
The printer does not feed paper to the paper-park position even
if you press the LF/FF and FONT buttons.
l
The tear-off feature is disabled.
Paper Handling 2-17