Epson 2250 - Manual (Page 44)

Printing on Special Paper
l
The printer does not feed paper back to the paper-park position
and then advance it to the top-of-form position between jobs
even if paper is loaded when you turn on the printer.
In addition to changing the back-feed setting, also follow the
instructions below when you print on labels:
l
Always use labels designed for use with a tractor. Do not try to
print on single-sheet labels.
l
Be sure to set up the printer and paper supply as shown on page
2-7.
l
Because labels are especially sensitive to extremes of
temperature and humidity, use them under normal operating
conditions only.
l
Make sure that your printing stays entirely within the printable
area of the labels because printing on the edge of a label or on
the backing sheet can damage the printer. See the Appendix for
more information on the printable area.
Note: When you want to remove labels from the printer, always
tear off the fresh supply of labels at the rear of the printer as
shown below and then press the LF/FF button to advance the
remaining labels out of the printer. This is necessary to prevent
the labels from being fed backward.
2-18 Paper Handling