Epson 2250 - Manual (Page 36)

Using Continuous Paper with the Push Tractor
Tips for using continuous paper
l
You can adjust the top-of-form position temporarily. Open the
printer cover and turn the gear marked by + and - signs to
adjust the position. This adjustment is lost when you turn off the
printer or feed the paper backward to the paper-park position
described later in this chapter.
paper-park position
l
If you want to change the top-of-form position permanently,
adjust it with the default-setting mode as described in Chapter 3.
l
Each time you turn on the printer with paper loaded, it reverses
the continuous paper to the paper-park position and then
advances it to the next top-of-form. Always remove your printed
sheets before you turn off the printer to keep the top-of-form
position accurate.
Note: When you set the back-feed setting to Disable in the
default-setting mode, the printer does not feed the paper
backward even if you press the LF/FF and FONT buttons or you
turn on the printer with paper loaded. For details, see “Labels” in
this chapter or “Using the Default-Setting Mode” in Chapter 3.
2-10 Paper Handling