Changing the default settings – Epson 2250 User Manual

Page 51

Text mode
Original mode

Using the Default-Setting Mode

Changing the default settings

If you do need to change any default settings, you can do as
described below. You press the control panel buttons, and the
control panel lights show your selections.

Note: You

can

repeat steps 6 through 8 if you want to make more

than

one

change. Also, you can turn off the printer and start over

if you are not sure about a setting.

Make sure the printer is turned off and paper is loaded in the

paper cassette. If you installed the push tractor, always use
continuous paper for the default-setting mode.

Slide the narrow cover off of the printer cover as shown. This
makes it easier to read the printed messages.

Using the Printer

3-7