Solutions to hdmi link problems – Epson EpiqVision Flex CO-FH02 3000-Lumen Full HD 3LCD Smart Home Theater Projector User Manual

Page 94

Solutions to HDMI Link Problems

If you cannot control an HDMI device using the HDMI Link feature, try the following solutions:

• Make sure all necessary cables are securely connected and the power is on for the projector and

connected video sources.

• Make sure the cables meet the HDMI CEC standard.

• Make sure the connected device meets the HDMI CEC standard. See the documentation supplied

with the device for more information.

• Replace the HDMI cable or try a shorter one.

• Check if the device is available in the

Device Connections

list in the Settings menu. If the device

does not appear, it does not meet the HDMI CEC standards. Connect a different device.

• Make sure the connected devices are turned on and in standby status. See the documentation

supplied with the device for more information.

• If you connected a new device or changed any connections, make sure the CEC function is set for the

connected device. You may need to restart the device.

Parent topic:

Solving Problems

Related references

Projector Feature Settings - Settings Menu

Solutions When a Message to Replace the Projector is Displayed

At the end of the projector lamp's life, the projector displays a message about replacing the projector.
Turn the projector off and consider replacing the projector even if the lamp continues to work.

Warning:

If you continue to use the projector after the lamp's life expires, the possibility that the lamp

may explode increases.