Adjusting projector features – Epson EpiqVision Flex CO-FH02 3000-Lumen Full HD 3LCD Smart Home Theater Projector User Manual
Page 54
54
Adjusting Projector Features
Follow the instructions in these sections to use your projector's feature adjustments.
Operating Connected Devices Using the HDMI Link Features
Shutting Off the Picture and Sound Temporarily
Zooming Into and Out of Images
Projector Security Features
Copying Menu Settings Between Projectors
Operating Connected Devices Using the HDMI Link Features
You can use the projector remote control to control certain features of devices connected to the
projector's HDMI port.
Note:
The connected device and HDMI cable must meet the HDMI CEC standard. The device must also
be configured; see the documentation that came with the device. All devices or functions may not
operate properly.
1.
Press the
menu button on the projector remote control.
2.
Press the arrow buttons to select the
Settings
menu and press
Enter
.
3.
Select the
Operation
setting and press
Enter
.
4.
Select the
HDMI Link
setting and press
Enter
.
5.
Select the
HDMI Link
setting again and press
Enter
. Then select
On
and press the
return button.
6.
Select the
Device Connections
setting and press
Enter
.