Epson EpiqVision Flex CO-FH02 3000-Lumen Full HD 3LCD Smart Home Theater Projector - Manual (Page 38)

38
Related references
Projector Feature Settings - Settings Menu
Related tasks
Pairing the Remote Control
Turning Off the Projector
Before turning off the projector, shut down any computer connected to it so you can see the computer
display during shutdown.
Note: Turn off this product when not in use to prolong the life of the projector. Lamp life will vary
depending upon mode selected, environmental conditions, and usage. Brightness decreases over time.
Note: When using the A/V Mute feature, the projector lamp is still on. To turn off the lamp, turn off the
projector.
Note: If the streaming media player's USB power cable is connected to the projector's USB-A port, the
streaming media player will turn off when the projector is turned off. It will restart when the projector is
turned on again. If the streaming media player is connected to an external power source, use the power
button on the streaming remote control to turn the device off and on.
1. Press the power button on the projector or the remote control.
The projector displays a shutdown confirmation screen.
2. Press the power button again. (To leave it on, press any other button.)
The lamp turns off and the status light turns off.