Adjusting the image height – Epson EpiqVision Flex CO-FH02 3000-Lumen Full HD 3LCD Smart Home Theater Projector User Manual
Page 42
42
3.
Press the arrow buttons to select the
Settings
>
Installation
>
Projection
setting and press
Enter
.
4.
Select the projection mode you want to use and press
Enter
.
5.
Press the
menu button to exit the menu or the
return button to return to the previous screen.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Adjusting the Image Height
If you are projecting from a table or other flat surface and the image is too high or low, you can adjust the
image height using the projector's adjustable foot.
1.
Turn on the projector and display an image.
2.
Press and hold the foot release lever to extend or retract the front adjustable foot.
Note:
You can adjust the position up to 12°.
3.
Release the lever to lock the foot when the image is at the position you want.
If the projected image is unevenly rectangular, you need to adjust the image shape.
Parent topic:
Using Basic Projector Features
Related references
Projector Feature Settings - Settings Menu
Related tasks
Correcting Image Shape with H/V Keystone
Correcting Image Shape with Quick Corner