Epson EpiqVision Flex CO-FH02 3000-Lumen Full HD 3LCD Smart Home Theater Projector - Manual (Page 65)

65
Your computer must be running one of the following operating systems:
• Windows 8.x
• Windows 10
• Windows 11
• macOS 10.12.x or later
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Connect a USB Type-A to Type-B cable to your projector's Service port.
3. Connect the other end to any available USB port on your computer.
4. Press and hold the return button on the remote control as you connect the power cord to the
projector.
5. When the status light turns on, release the return button.
The projector shows up as a removable disk on your computer.
6. Open the removable disk and copy the pjconfdata.bin file to your computer.
7. Once the file has copied, do one of the following:
• Windows: Open the My Computer , Computer , Windows Explorer , or File Explorer utility.
Right-click the name of your projector (listed as a removable disk) and select Eject .
• Mac: Drag the removable disk icon for your projector from the desktop into the trash.
The projector turns off when you disconnect the USB cable.
Parent topic: Copying Menu Settings Between Projectors
Transferring Settings from a Computer
After saving projector settings to a computer, you can transfer them to another projector of the same
model.
Your computer must be running one of the following operating systems:
• Windows 8.x
• Windows 10
• Windows 11
• macOS 10.12.x or later
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.