Pairing the remote control – Epson EpiqVision Flex CO-FH02 3000-Lumen Full HD 3LCD Smart Home Theater Projector User Manual
Page 39
39
Note:
With Epson's Instant Off technology, there is no cool-down period so you can pack up the
projector for transport right away (if necessary).
Caution:
Do not turn the projector on immediately after turning it off. Turning the projector on and off
frequently may shorten the life of the lamp.
3.
To transport or store the projector, make sure the status light is off, then unplug the power cord and
any other connected devices or cables.
Caution:
To avoid damaging the projector or lamp, never unplug the power cord when the status
light is on or flashing.
Parent topic:
Using Basic Projector Features
Pairing the Remote Control
To use Android TV and video-on-demand features, you must pair the remote control to the projector.
Note:
When you first turn on the projector, instructions for pairing the remote control are displayed on
the screen.
1.
Turn on the projector.
2.
When the pairing screen is displayed, press and hold the
volume down and
Enter
buttons on the
remote control until the indicator starts blinking.