Epson EpiqVision Flex CO-FH02 3000-Lumen Full HD 3LCD Smart Home Theater Projector - Manual (Page 92)

92
Solutions When the Image Brightness or Colors are Incorrect
If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
• Try selecting a color mode that best fits the image and environment.
• Check your video source settings.
• Adjust the available settings on the Image menu for the current input source, such as Brightness ,
Contrast , Tint , and/or Color Saturation .
• Make sure all the cables are securely connected to the projector and your video device. If you
connected long cables, try connecting shorter cables.
• Position the projector close enough to the screen.
Parent topic: Solving Image or Sound Problems
Related references
Image Quality Settings - Image Menu
Available Color Modes
Related tasks
Adjusting Picture Quality in Detail
Changing the Color Mode
Solutions When the Image is Upside Down
If the projected image is upside down, try the following solutions:
• Select the correct projection mode.
Parent topic: Solving Image or Sound Problems
Related tasks
Changing the Projection Mode Using the Menus
Solutions to Sound Problems
If there is no sound when you expect it or the volume is too low or high, try the following solutions:
• Adjust the projector's volume settings.
• Press the mute button on the remote control to resume audio if it was temporarily muted.
• Press the A/V mute button on the projector remote control to resume video and audio if they were
temporarily stopped.
• Make sure the Audio Out Device settings are correct.