Epson EpiqVision Flex CO-FH02 3000-Lumen Full HD 3LCD Smart Home Theater Projector User Manual
Page 36
36
1.
Connect the power cord to the projector's power inlet and plug it in to an electrical outlet.
2.
Press the
power button on the projector or the remote control to turn on the projector.
The status indicator flashes blue as the projector warms up. After the projector is warmed up, the
status light stops flashing and turns blue.
Warning:
Never look into the projector lens when the light is on. The light can damage your eyes
and is especially dangerous for children and pets.
Caution:
Make sure no objects are blocking the light from the projector lens. Objects blocking the
lens for an extended time can melt and light that is reflected back into the lens can cause the
projector to malfunction.
When the
Direct Power On
setting is enabled in the Settings menu, the projector turns on as soon as
you plug it in. The projector also turns on automatically when power is restored after a power outage.
If you select a specific port as the
Auto Power On
setting in the Settings menu, the projector turns on as
soon as it detects a signal or cable connection from that port.
The first time you turn on the projector, the remote control pairing screen and initial setup screen are
displayed. Follow the on-screen instructions to complete the initial setup.
Parent topic: