Connecting to a new wi-fi router – Epson SureColor T3170M 24" Wireless Printer, Scanner & Copier User Manual
Page 56
56
You see a screen like this:
3.
Select
Description
>
Wired LAN Connection Method
>
Start Setup
.
The Wi-Fi connection is disabled. Select
OK
.
4.
Connect one end of an Ethernet network cable to the product's
LAN
port.
5.
Connect the other end to any available LAN port on your router or access point.
Parent topic:
Changing or Updating Network Connections
Connecting to a New Wi-Fi Router
If you change the wireless router you have been using on your network, you need to update your
product's Wi-Fi connection to the new router.
Note for Latin America:
If you are using a 5 GHz wireless router, set the router to operate in dual band
(2.4 GHz and 5 GHz) mode. If your router uses a single network name (SSID) for both the 2.4 GHz and
5 GHz band, give each band its own network name (SSID) instead, such as Home Network 2.4 GHz and
Home Network 5 GHz. See your router documentation or contact your internet service provider for
instructions.
1.
Do one of the following:
•
Windows
: Uninstall your product software.
•
Mac
: Go to the next step.