Epson SureColor T3170M 24" Wireless Printer, Scanner & Copier User Manual
Page 126
126
Note:
If lines in your drawing are not printed properly, print the drawing using HP-GL/2 or HP RTL mode
using the product control panel.
1.
Open the file you want to print in your CAD software.
2.
Click
Plot
and select your product as the printer.
3.
Click
Properties
.
4.
On the
Device and Document Settings
tab, click
Custom Properties
.
You see the printer driver window:
5.
Select the
Document Size
and
Output Size
settings as necessary.
6.
Select the
Source
setting.
Note:
If you select
Roll Paper
, select the width of the roll as the
Roll Paper Width
setting.
7.
Select the
Media Type
setting.
This manual is related to the following products: