Loading originals – Epson SureColor T3170M 24" Wireless Printer, Scanner & Copier User Manual
Page 141
141
• Tracing paper*
• Film
• Blueprints
* When tracing paper is loaded, the product cannot automatically detect the width of the paper. Make
sure you set the
Original Size
setting on the
Copy
menu or the
Scan Size
setting on the
Scan
menu to
the size of your original.
Caution:
Do not load the following types of originals directly in the scanner, or they may cause paper
jams or damage the scanner:
• Originals that are bound
• Originals that are bent
• Originals with carbon backing
• Originals with staples, paper clips, or glue
• Originals with many holes (such as loose-leaf paper)
• Irregularly shaped originals or originals that are not cut at right angles
• Originals with attached photos, stickers, or labels
• Transparent originals
• Glossy originals
• Torn or deteriorated originals
Parent topic:
Loading Originals
You can load an original that meets the document specifications in the input slot.
Caution:
Do not load photos, valuable original documents, or artwork directly into the product. This may
wrinkle or damage the original.
Note:
If the original is curled or creased, straighten or smooth the irregularity before loading the
document into the product. If the original is longer than 39 inches (1 meter), support the document with
your hand or the document support during scanning.