Epson SureColor T3170M 24" Wireless Printer, Scanner & Copier User Manual
Page 208
208
3.
Make sure the correct paper type is selected on the product control panel.
4.
Select
Settings
>
Maintenance
>
Print Quality Adjustment
.
You see a screen like this:
5.
If you want to change the paper source that the adjustment pattern prints on, select
Paper Source
.
Otherwise, select
Start
to print the adjustment pattern.
The first set of adjustment patterns prints.
Note:
If you are printing on cut sheets in A2 (16.5 × 23.4 inches [420 × 594 mm]) size or larger, or on
roll paper with
Auto Cut
turned off, do not remove or pull out the paper until the second set of
alignment patterns prints.
6.
Follow the instructions on the LCD screen to select the best patterns for the first set of adjustment
patterns, and select
OK
.
The second set of adjustment patterns prints.
Note:
If you are printing on cut sheets smaller than A2 (16.5 × 23.4 inches [420 × 594 mm]) size,
load the second sheet of paper.
7.
Follow the instructions on the LCD screen to select the best patterns for the second set of
adjustment patterns, and select
OK
.
The screen displays a confirmation message and returns to the home screen.
Parent topic: