beautypg.com

Sony NW-A306 Walkman A Series High-Resolution Digital Audio Player (Black) User Manual

Page 57

background image

A

(mismatch) mark is displayed if there is a mismatch between the image circle size of the lens and the effective

picture size imager scan mode setting.
When Imager Scan Mode is set to FF, a “C” mark is displayed in modes with narrower angle of view (cropped).
Cropping occurs in the following modes.

When the recording format is 3840×2160 and S&Q Motion frame rate is 100 fps or 120 fps
When [Codec] is set to RAW or RAW & XAVC-I and the RAW output format is 3840×2160
For details about the imager scan mode, see “Setting the imager scan mode” in “

Configuring Basic Operation

.”

RAW output operation status indicator

Displays the output status of the RAW signal.

For details about RAW, see “

Recording RAW Video

.”

6.

Slow & Quick Motion shooting frame rate indicator

For details about Slow & Quick Motion, see “

Slow & Quick Motion

.”

7.

Focus position indicator

Displays the focus position.

8.

Focus mode indicator

Face/eye detection AF

For details about face/eye detection AF, see “

Tracking Using Face and Eye Detection (Face/Eye Detection AF)

.”

9.

Display

Meaning

Focus Hold

Focus Hold mode

MF

MF mode

AF

AF mode

(Realtime tracking AF mode) Realtime tracking AF mode

Display

Meaning

(Face/eye detection AF)

Indicates face/eye detection AF is active

(face/eye only AF)

Indicates face/eye only AF is active

(saved tracking face)

Indicates a tracking face has been saved

(AF paused icon during face/eye detection AF)

Indicates that AF was paused during face/eye detection AF

*

Displayed when there is no saved tracking face and a face is not detected, or when there is a saved tracking face but the tracking target
face is not detected.

*

Zoom position indicator

Displays the zoom position in the range 0 (wide angle) to 99 (telephoto) (if a lens that supports zoom position display
is attached).
You can also change the indicator to a bar display or focal length display using the [Technical] > [Lens] > [Zoom
Position Display] setting in the camera menu.
The following items are added to the display when Clear Image Zoom is enabled.

10.

57