Outputting an optical fiber signal, For details, see, Help guide – Sony NW-A306 Walkman A Series High-Resolution Digital Audio Player (Black) User Manual

Page 418

Interchangeable Lens Digital Camera

ILME-FR7 / ILME-FR7K

Outputting an Optical Fiber Signal

You can output an SDI signal converted to an optical signal by connecting an SFP+ module (option) to the OPTICAL
connector of the unit. Use an SFP+ module that matches the signal band of each format.

Signal band

4K (59.94p, 50p): 12G
4K (other than 59.94p, 50p): 6G
HD (59.94p, 50p): 3G
HD (other than 59.94p, 50p): 1.5G

Note

Use a module that complies with the following standards.

SFF standards
SFF-8083/SFF-8418/SFF-8419*/SFF-8432/SFF-8433/SFF-8071/SFF-8472

SDI standards
ST297/ST292/ST424/ST425/ST2081/ST2082

The same signal as the SDI output connector is output to the SFP+ module.

The unit does not support optical fiber signal input.

Use an SFP+ module for optical fiber signal output. For details about verified SFP+ modules, contact your dealer or Sony service
representative.

* Power Level I (1.0 W)

418