Selecting the audio input device – Sony NW-A306 Walkman A Series High-Resolution Digital Audio Player (Black) User Manual

Page 200

Help Guide

Interchangeable Lens Digital Camera

ILME-FR7 / ILME-FR7K

Selecting the Audio Input Device

Set the following switches according to the device connected to the AUDIO IN connector.

Note

Audio is not recorded in Interval Rec mode or Slow & Quick Motion mode.

When a microphone is connected, set SETUP switch 2 on the connector block on the rear of the unit.

CH-1 and CH-2 have common settings.

Setting

Description

OFF
(default)

Select when using a dynamic microphone or battery-operated microphone. This turns off the +48 V
phantom power supply and sets the LINE or MIC input as the CH-1 and CH-2 audio source.

Select when using a +48 V phantom power supply compatible microphone. This turns on the +48V
phantom power supply and sets the phantom power supply compatible microphone as the CH-1 and
CH-2 audio source.

Set the type of connected device using [Audio] > [Audio Input] > [AUDIO IN Select] in the camera menu.

Select the audio input using [Audio] > [Audio Input] > [CH1 Input Select] to [CH4 Input Select] in the web
menu or camera menu.

200