Sony a6400 Mirrorless Camera - Manual (Page 86)

86
• The following functions are not available when
the streaming function is on.
– Menu operations
– Touch operation of the LCD screen
– SIMUL/RELAY REC
– PROXY REC MODE
– DATE REC
– ZEBRA
– PEAKING
– MARKER
– HISTOGRAM
– LOCK-ON AF
– FACE DETECTION
– COLOR BAR
– D. EXTENDER
– SLOW & QUICK (S&Q MOTION, SUPER
SLOW MOTION)
– NIGHTSHOT
– FOCUS MAGNIFIER
– AUTO MODE SET
– WB SET (during streaming)
– Other network functions
– STATUS CHECK
• Only wired LAN connection is supported when
[AIRPLANE MODE] is set to [ON].
• During streaming, the camcorder does not turn
off even if the LCD screen is closed and the
viewfinder is returned to its original position.
• If the file format is XAVC QFHD and streaming
is started, then [QFHD REC OUTPUT] is set to
[VF/LCD PANEL], [NIGHTSHOT LIGHT] is
set to [OFF], and [LCD BRIGHT] is set to
[NORMAL] while streaming.
• If the file format is AVCHD, MPEG HD, or
XAVC HD and streaming is started, then
[NIGHTSHOT LIGHT] is set to [OFF] and
[LCD BRIGHT] is set to [NORMAL] while
streaming.
• Streaming distribution transmits the raw video
and audio data via the Internet.
Accordingly, the data may be disclosed to other
parties.
• Check that the streaming data is being received
by the receiving device.
• Data may be transmitted to a third party if the
address or other settings are configured
incorrectly.
• Some frames may not be played, depending on
the network status.
• The image quality of fast-changing scenes may
be adversely affected.
z Tip
• If an error occurs during streaming distribution
standby or during streaming distribution, a
message appears. If [RECONNECT] appears,
selecting it will attempt to reconnect the
camcorder. Selecting [END] will disconnect the
camcorder. Repeat the procedure from step
1 to
reconnect.
To record using the camera while
streaming
You can record movies in XAVC,
AVCHD, or MPEG HD on a memory card
while streaming is in progress.
Press the START/STOP button (handle
record button) after the camcorder enters
streaming standby mode to start recording.
To stop recording, press the START/STOP
button (handle record button) again.
The camcorder recording status is displayed
using the following indicators.
STBY: Standby mode
REC: Recording
b Note
• During streaming, switching the current slot
using the SLOT SELECT button or removing/
inserting media is not possible.
Camcorder operation during
streaming
The following functions are enabled during
streaming. Use the hardware switches and
buttons to control the camcorder. Operation
from the menu is not supported.
• Zoom
• Focusing
• To adjust the output audio level, adjust the
input level using the AUDIO LEVEL dial
of the XLR handle unit.
• Exposure adjustment (iris, ISO
sensitivity/gain, and shutter speed)
• White balance
Using the streaming function (STREAMING) (Continued)