Sony a6400 Mirrorless Camera - Manual (Page 84)

84
and then connect to the router
using a LAN cable.
3
Press the MENU button.
4
Select (NETWORK SET) t
[WIRED LAN SET] t [IP
ADDRESS SET].
5
Configure the access point
settings.
IP address
Select the IP address configuration
method.
When [Manual] is selected, enter the IP
address configuration items displayed
on the screen, and select [OK].
z Tip
• Selecting [DNS server setting] on the IP
ADDRESS SET screen will display the DNS
server setting screen.
Using the streaming
function (STREAMING)
You can connect the camcorder to a
network and stream a movie in real-time to
external devices.
b Note
• Camcorder streaming uses MPEG2-TS/UDP
transport stream. To view the streamed video
and audio, use devices that supports this
transport stream format. For details, refer to the
instruction manuals of each device.
There are limitations on the size of the
original file movie and the streaming movie.
For details, see “Streaming, network client
mode, and USTREAM supported formats”
(p. 158).
You configure streaming settings and
register them using PRESET beforehand to
distribute a stream using those settings.
The following items can be configured.
SIZE
Select the image size for streaming.
– 1280Ч720
– 640Ч360
z Tip
• Select a size of “640×360” for increased
streaming distribution stability.
DESTINATION SET
Configure the streaming distribution
destination.
–
Host Name: IP address or host name of
the receiver
– Port: Port number used for streaming on
the receiver
1
Configure the basic network
settings (p. 78, 83).
Streaming formats
Configuring streaming (preset
registration)
Configuring a wired LAN
(Continued)