Sony a6400 Mirrorless Camera - Manual (Page 60)

60
5 Select [OK].
To reset the timecode
Select [RESET] in step 2 of “Setting the
timecode” to reset the timecode
(00:00:00:00).
To reset the timecode using the
Wireless Remote Commander
Press the TC RESET button on the Wireless
Remote Commander to reset the timecode
(00:00:00:00).
1 Press the MENU button, and select
(TC/UB SET) t [UB PRESET].
2 Select [PRESET].
3 Select the first two digits.
4 Set other digits by repeating step 3 .
5 Select [OK].
To reset the user bits
Select [RESET] in step 2 of “Setting the
user bits” to reset the user bits (00 00 00
00).
By recording with a frame rate that is
different from the playback frame rate, you
can record images to be played back as
slow motion or quick motion images. The
images recorded with the Slow & Quick
Motion function will appear smoother than
slow or fast-forward playback of images
recorded at normal speed.
You must set the recording format and
frame rate. The playback speed is
determined by the combination.
1 Press the MENU button, and select
(CAMERA SET) t [SLOW &
QUICK] t [S&Q MOTION] t [REC
FORMAT].
2 Set the recording format.
3 Select [FRAME RATE].
4 Set the frame rate.
1 Press the ASSIGN1/S&Q button
repeatedly to display [S&Q MOTION]
on the screen.
2 Press the START/STOP button.
Slow & Quick Motion recording starts.
3 To stop, press the START/STOP button
again.
z Tip
• You can also press the MENU button and select
(CAMERA SET) t [SLOW & QUICK]
t [S&Q MOTION] t [EXECUTE] to switch
to Slow & Quick Motion shooting mode.
To change the frame rate setting
Press and hold the ASSIGN1/S&Q button
for about 1 second, then change the value.
Pressing the
v / V / b / B /SET button, or
pressing and holding the ASSIGN1/S&Q
button again for about 1 second restores the
previous setting.
To cancel Slow & Quick Motion
recording
Press the ASSIGN1/S&Q button or the
MENU button during standby.
b Notes
• The supported memory cards that can be used
vary depending on the file format (p. 28).
• In quick motion recording, the camcorder may
continue recording for a few more seconds after
you press the START/STOP button to stop
recording (up to 30 seconds). Do not operate
your camcorder while the [REC] indicator is
Setting the user bits
Recording with the Slow &
Quick Motion function
Preparation
To record with the Slow & Quick
Motion function
Useful functions (Continued)